Viron Halar Coated SST Cutsheets
Adaptors, Loose Rings, Speciality
• 1 Viron Loose Angle Rings 3-48 inch dia
• 2 Viron Loose Angle Rings 50-98 inch dia
• 3 Viron Loose Angle Rings 100-120 inch dia
• 4 Viron Viro-Port Cutsheet
• 5 Male Adapter
• 6 Female Adapter
• 7 Expansion Straight Joint – 335
• 8 NW50 ISO KF Straight
Blastgate Dampers
• 1) (3in-18in Horiz BG (With Wiper Blade-Lockout)
• 2) (3in-18in Horz BG (No Wiper Blade-Lockout)
• 3) (3in-18in Vert BG (No Wiper Blade-Lockout)
• 4) (3in-18in Vert BG (With Wiper Blade-Lockout)
• 5) (20in-34in Horiz BG (With Wiper Blade & Lockout)
• 6) (20in-34in Horiz BG (No Wiper Blade or Lockout)
• 7) (20in-34in Vert BG (With Wiper Blade & Lockout)
• 8) (20in-34in Vert BG (No Wiper Blade or Lockout)
• 9) (36in Horiz BG (With Wiper Blade & Lockout)
• 10) (36in Horiz BG (No Wiper Blade-Lockout)
• 11) (36in Vert BG (With Wiper Blade-Lockout)
• 12) (36in Vert BG (No Wiper Blade-Lockout)
• 13) Blastgate Horizontal – Thin Vsst431
• 14) Waflle Type Blastgate Vsst148
• 15) Blastgate – Gate & Cap Detail
• 16) HorChart-Layout1
• 17) VertChart-Layout1
Elbows (Round)
• 1 (2 gore 15º elbow Vsst205)
• 2 (2 gore 30º elbow Vsst005)
• 3 (2 gore 45º elbow Vsst075)
• 4 (3 gore 45° elbow with Str & Drain – 474
• 5 (3 gore 45º elbow Flat Ring bottom side Vsst815)
• 6 (3 gore 45º elbow Flat Ring top side Vsst816)
• 7 (3 gore 45º elbow Vsst004)
• 8 (3 gore 45º elbow with 150# Flg Drain)
• 9 (3 gore 45º elbow with added str
• 10 (3 gore 90º elbow Vsst021)
• 11 (2 gore 90º elbow Mitered Vsst055)
• 12 (4 gore 60º elbow HORZ Vsst164
• 13 (4 gore 60º elbow VERT Vsst164
• 14 (4 gore 60º elbow Vsst164)
• 15 (4 gore 90º elbow Vsst008)
• 16 (5 Gore 90 Deg Reducing Elbow)
• 17 (5 gore 90° elbow HORZ
• 18 (5 gore 90° elbow VERT
• 19 (5 gore 90° Raw End Reducing Elbow – 073A
• 20 (5 gore 90º elbow Vsst002)
• 21 (5 gore 90º elbow with (1) Flat Ring)
• 22 (5 gore 90º elbow with 150# Flg Drain)
• 23 (5 gore 90º elbow with Raw End Vsst073)
End Caps (Round)
• 3in-12in End Cap Standard
• 14in-28in End Cap with Backing Ring
• 30in-44in End Cap with Backing Ring
• 46in-48in End Cap with Backing Ring
• 50in-64in End Cap with Backing Ring & Center Support
• 66in-74in End Cap with Backing Ring & Center Support
• 76in-90in End Cap with Backing Ring & Center Supports
• 92in-106in End Cap with Backing Ring & Center Supports
• 108in-120in End Cap with Backing Ring & Center Supports
• End Cap with (1) Coupling & Backing Ring Vsst838
• End Cap with (1) Nipple & Cap & Backing Ring Vsst838
• End Cap with (2) Couplings Vsst838
• End Cap with 2 couplings Vsst684
• End Cap with Offset Down Stub
• End Cap with Stub Flange Standard Vsst157
Rectangular Duct
• 1) Rectangular Straight
• 2) Rect Straight with Rect. Tap – 394
• 3) Rect. Straight with (1) Round Tap
• 4) Rect Str with Rect Double Boots Vsst 823
• 5) Rectangular Straight with Conical Tap Vsst547
• 6) Rect. Butterfly Damper Vsst696-Layout1
• 7) Rect. End Cap Vsst071-Layout1
• 8) Rect. Offset Vsst888-Layout1
• 9) Rectangular 45 degree elbow Vsst117
• 10) Rectangular 90 degree elbow Vsst118
• 11) Rect. Square Throat Elbow Vsst896-Layout1
• 12) Square Throat 90 rect elbow – 536
• 13) Square Throat 90 rect elbow – no angle
• 14) Rectangular 60 degree elbow Vsst070
• 15) Offset Square to Round Vsst016
• 16) Raw Edge Sq to Rnd – 336-Layout1
• 17) Rect. FOT Reducer
• 18) Rect 2-Way offset – 888
• 19) Rectangular Concentric Taper Vsst695-Layout1
• 20) Rect. Taper Offset One Way Vsst498-Layout1
• 21) Rect. Taper FOB Vsst501-Layout1
• 22) Rectangular Taper FOS- 323-Layout1
• 23) Square to Round (Flat on Top) Vsst789
• 24) Square to Round Std Vsst035
• 25) Sq to Rnd with Lexan Window – 754 (2)
• 26) Standard Rect. Blastgate Vsst602
• 27) Sq to Rnd with Lexan Window – 754 (1)
• 28) Square to Round (FOB) Vsst783-Layout1
• 29) Rect offset down- 320
• 30) Rect offset down – 858
• 31) Rect. Straight with (2) Boot Taps Vsst314
• 32) (2-Way Sq to Rnd (FOB-FOS) Vsst763
Saddle Taps
• 1) Round Saddle Tap with Stub & AR – #120
• 2) Rect. Saddle with Rnd Tap & AR- #857
• 3) Sabino Saddle Tap with Couplings
• 4) Sabino Saddle Tap with NW-50
• 5) Saddle tap with 150# FL. Drain – 120a
• 6) SST Saddle Tap with Boot
Straight Duct (Round)
• 1) Straight vsst01
• 2) Straight with Raw Edge vsst029
• 3) Straight with Raw End & Welded Flat Ring
• 4) Str with both ARs welded (no vanstone flg)
• 5) Straight with (1) 150# Flg & (1) Angle Ring
• 6) Straight with 150# Flange Drain
• 7) Straight with 90º Stub @ 90º
• 8) Straight with Stub @ 0° and Drain
• 9) Straight with 90º Stub @ 0º
• 10) Straight with 90º Stub @ 180º
• 11) Straight with NW-25 Ferrule Assembly @ 90°
• 12) Straight with 90º Stub @ 270º
• 13) Straight with 45º tap @ 90º
• 14) Straight with 45º tap @ 180º
• 15) Straight with 45º tap @ 0º
• 16) Straight with 2 90º Stubs @ 90º
• 17) Straight with (2) 90º Stubs @ 180º
• 18) Straight with (2) 90º Taps @ 0º
• 19) Straight with (3) 90º Stubs @ 90º
• 20) Straight with (4) Taps (2) at 0° & (2) @ 90°
• 21) Straight with (2) 45 Deg Taps @ 180 Degrees
• 22) Straight with (2) Conical Taps @ 90º
• 23) Straight with (2) Stubs 180º Apart #127
• 24) Straight with (3) 90º Stubs @ 180º
• 25) Straight with (1) Conical Tap @ 90º
• 26) Straight with (4) 45 Degree Taps
• 27) Straight with (5) Stubs (3) @ 90 & (2) @ 270
• 28) Straight with (2) Conical Taps @ 0º and (2) @ 180º
• 29) Straight with (5) stub flanges Vsst846
• 30) Straight with (2) Conical Taps @ 180º
• 31) Straight with 90° Tap @ 0° & Conical @ 180°
• 32) Straight with (2) Conical Taps @ 270º
• 33) Straight with (3) Conical Taps Varying Degrees
• 34) Straight with Conical Tap @ 180°
• 35) Straight with Conical Taps @ 0º & 180º
• 36) Straight with Conical Tap @ 0 degrees
• 37) Straight with (3) Conical Taps @ 0°- 445
• 38) Straight with (3) Conical Taps @ 180°- 445
• 39) straight & conical – 869 a
• 40) straight & conical assembly – 198b
• 41) Straight with (4) Boots
• 42) Straight (Boot) Tee @ 0º
• 43) Straight Boot Tee @ 90º
• 44) Straight Boot Tee @ 90º & Flg Drain
• 45) Str with (1) Boot and (1) Coupling @ 0º
• 46) Straight with Boot @ 0º
• 47) Str with Boot @ 180º & couplings @ 0º
• 48) Straight with Tap & Conc Reducer – 022
• 49) Double Tee with Concentric Taper – 604
• 50) Opposed Double Wye #857
• 51) Straight with Bradford Assembly @ 0°
• 52) Straight with Bradford @ 180
• 53) Straight with (2) Bradford Taps (180° Apart)
• 54) Straight with Bradford Assemblies @ 90 & 0 Deg. (3 views)
• 55) Straight, 45 tap & drain (1)
• 56) Straight, 45 tap @ 0° & drain (2)
• 57) Straight, tee @ 180 & drain
• 58) Straight with 45° Tap @ 180 & (2) Bradford Assy – 847b
• 59) Straight with (2) 45 taps @ 180°
• 60) Straight with (2) 45° taps @ 0° & drain
• 61) Straight with (2) 45° taps @ 0°
• 62) Straight with (2) 45° taps @ 180° & drain
• 63) Straight with (2) Taps 180° Apart & Drain
• 64) Straight with (3) Taps & Drain
• 65) Straight with (4) Taps & A Drain
• 66) Straight with (4) Taps & drain
• 67) Straight with (2) 45° Taps (QC on Taps) Vsst484
• 68) Straight with (3) 45° Taps Vsst119
Tapers-Offsets (Round)
• 1) Concentric Reducer Standard Vsst081
• 2) Concentric Reducer with Flange (Large End) Vsst407
• 3) Conc Reducer with RE Large Vsst083
• 4) Conc Reducer with RE (small) Vsst059
• 5) Concentric Reducer FOB Vsst007
• 6) Concentric Reducer with 150# Flg Drain
• 7) Reducer FOB, Raw Both Ends
• 8) Concentric Reducer with 150# Flange Vsst178
• 9) Reducer with 45 deg tap Vsst030
• 10) Eccentric Reducer Vsst065
• 11) Reducer Angle to MNPT
• 12) Reducer angle ring to NW50
• 13) Standard 3 pc Offset Vsst189
• 14) Std Offset with (1) Raw End Vsst899-Layout1
• 15) Dual Raw Edge Reducing Offset
• 16) Offset Reducer Vsst074
• 17) Offset Reducer with Raw Edge (A) Vsst171
• 18) Offset Reducer with Raw Edge (B) Vsst331
• 19) Reducer Raw on Both Ends Vsst293
Volume Dampers
• 1 (4-16 butterfly damper – flange, handle)
• 2 (4-16 butterfly damper – flange, handle, seals)
• 3 (4-16 butterfly damper – flange, wheel)
• 4 (4-16 butterfly damper – flange, wheel, seals)
• 5 (4-16 butterfly damper with Hytork Pneumatic Actuator)
• 6 (18in-48in.Damper-flange-handle)
• 7 (18in-48in.Damper-flange-handle-seals)
• 8 (18in-48in.Damper-Flange-Chain-Seals)
• 9 (18in-48in-Gear Drive Vertical Damper)
• 10 (18in-48in-Gear Drive Horizontal Damper)
• 11 (18in-48in Damper-Chain-Seals-Gear Drive Horz)
• 12 (18in-48in Damper with Hytork Pneumatic Actuator)
• 13 (50in-72in.Damper-Chain Wheel,Seals)
• 14 (50in-72in.Damper-Wheel,Seals-Horizontal
• 15 (50in-72in.Damper-Wheel,Seals-Vertical
Wyes
• Reducing wye – 717
• Standard wye – 012
Viron FRP Cutsheets
Dampers
• FRP Horizontal Blastgate
• FRP Round Volume Damper with Flanges
• FRP Vert Blastgate with Flanges Vfrp088
• FRP Vertical Blastgate
• FRP Volume Damper with Plain Ends Vfrp051
Elbows
• FRP 2 gore 30° elbow with flanges Vfrp211
• FRP 3 Gore 45° Elbow HTR
• FRP 3 Gore 90° Elbow HTR
• FRP 3 gore 90° HTR elbow with flgs Vfrp011
• FRP 5 Gore 90° Elbow HTR
• FRP 30° Smooth FTR Elbow Vfrp019-Layout1
• FRP 45° Elbow FTR 3 Gore
• FRP 45°Elbow Smooth FTR
• FRP 90 Degree Elbow Smooth FTR
• FRP 90° FTR Elbow with Straight 1 End Vfrp024
• FRP 90° Smooth Elbow with (2) Flanges
• FRP Smooth 90° Elbow with flange
• FRP Smooth 90° Elbow with flanges
End Caps
• FRP End Cap-Drilled
• FRP End Cap
Rectangular Duct
• FRP 90° Rect elbow with flanges
• FRP Rect 90° elbow with flanges (2)
• FRP Rect Offset with flanges
• FRP Rect Straight with flanges (2)
• FRP Rect. Elbow with Taper One End
• FRP Rect. Offset
• FRP Rect. Reducing Elbow with Straight
• FRP Rect. Straight (plain ends)
Saddles, Tapers, Offsets
• FRP 45 deg Saddle Tap – Flanged
• FRP 90 Degree Saddle Tap with Flange Vfrp185-Layout1
• FRP 90 Degree Saddle Tap
• FRP Conical Saddle Tap with Flange Vfrp327-Layout1 (2)
• FRP Eccentric Taper (Plain ends) Vfrp366
• FRP FOB Taper (plain ends) Vfrp032
• FRP Offset FRP Saddle Tap – Rect 45
• FRP Saddle Tap with 45 degree tap
• FRP Square to Round (plain ends)
• FRP Square to Round (with flgs)
• FRP Taper (plain ends)
• FRP Taper with flange (large end) Vfrp173
• FRP Taper with flange (small end)
Straight Duct
• FRP Straight (plain ends)
• FRP Straight Duct with 1 Flange
• FRP Straight Duct with 2 Flanges
• FRP Straight with 45 Degree Tap
• FRP Straight with 90 Degree Tap
• FRP Stub Flange (Drilled) Vfrp352-Layout1
• FRP Stub Flange (Un-Drilled)
Viron PVC Cutsheets
Viron PVC Blastgates
• PVC Vertical Blastgate with Plain Ends
• PVC Vertical Blastgate with 2 Collars
• PVC Vertical Blastgate with 1 Collar
• PVC Horizontal Blastgate with Plain Ends
• PVC Horizontal Blastgate with 2 Collars
• PVC Horizontal Blastgate with 2 Collars and Seal
• PVC Horizontal Blastgate with 1 Collar
Viron PVC Elbows – 30
• PVC HTR 2 Gore 30° Elbow with Plain Ends-033
• PVC HTR 2 Gore 30° Elbow with (1) Collar-034
• PVC HTR 2 Gore 30° Elbow with (2) Collars-035
• PVC FTR 2 Gore 30° Elbow with Plain Ends-036
• PVC FTR 2 Gore 30° Elbow with (1) Collar-037
• PVC FTR 2 Gore 30° Elbow with (2) Collars-038
Viron PVC Elbows – 45
• PVC FTR 2 Gore 45° Elbow with (1) Collar-011
• PVC FTR 2 Gore 45° Elbow with (2) Collars-010
• PVC FTR 2 Gore 45° Elbow with Plain Ends-018
• PVC FTR 2 Gore 45° Elbow with Str & (1) Collar-155
• PVC FTR 2 Gore 45° Elbow with Str & Plain Ends-032
• PVC FTR 2 Gore 45° Elbow with Str each end-218
• PVC FTR 3 Gore 45° Elbow with (1) Collar-057
• PVC FTR 3 Gore 45° Elbow with (2) Collars-415
• PVC FTR 3 Gore 45° Elbow with Flat Flg Each End-244
• PVC FTR 3 Gore 45° Elbow with Plain Ends-056
• PVC HTR 2 Gore 45° Elbow with (1) Collar-045
• PVC HTR 2 Gore 45° Elbow with (1) Collar-177
• PVC HTR 2 Gore 45° Elbow with (2) Collars-184
• PVC HTR 2 Gore 45° Elbow with (2) Str’s & (1) Collar-424
• PVC HTR 2 Gore 45° Elbow with Plain Ends-009
• PVC HTR 3 Gore 45° Elbow with (2) Collars-046
• PVC HTR 3 Gore 45° Elbow with (2) Flat Flgs-007
• PVC HTR 3 Gore 45° Elbow with Plain Ends-044
• PVC HTR 3 Gore 45° Elbow with Str & (1) Collar-217
Viron PVC Elbows – 60
• PVC FTR 3 Gore 60° Elbow with (1) Collar-058
• PVC FTR 3 Gore 60° Elbow with (2) Collars-059
• PVC FTR 3 Gore 60° Elbow with Plain Ends-060
• PVC HTR 3 Gore 60° Elbow with (1) Collar-047
• PVC HTR 3 Gore 60° Elbow with (2) Collars-048
• PVC HTR 3 Gore 60° Elbow with Plain Ends-049
Viron PVC Elbows – 90
• PVC HTR 3 Gore 90° Elbow with (1) Collar-050
• PVC HTR 3 Gore 90° Elbow with (1) Str & (1) Collar-264
• PVC HTR 3 Gore 90° Elbow with (2) Collars-051
• PVC HTR 3 Gore 90° Elbow with Plain Ends-052
• PVC HTR 5 Gore 90° Elbow with (1) Collar-055
• PVC HTR 5 Gore 90° Elbow with (1) Str & (1) Collar-258
• PVC HTR 5 Gore 90° Elbow with (2) Collars-054
• PVC HTR 5 Gore 90° Elbow with (2) Str’s & Plain Ends-363
• PVC HTR 5 Gore 90° Elbow with Plain Ends-053
• PVC FTR 2 Gore Mitered 90° Elbow with (2) Collars-061
• PVC FTR 2 Gore Mitered 90° Elbow with Plain Ends-190
• PVC FTR 3 Gore 90° Elbow with (1) Collar & (1) Angle Flg-064
• PVC FTR 3 Gore 90° Elbow with (1) Collar-065
• PVC FTR 3 Gore 90° Elbow with (1) Flat Flg-004
• PVC FTR 3 Gore 90° Elbow with (1) Str & (1) Collar-261
• PVC FTR 3 Gore 90° Elbow with (2) Collars-066
• PVC FTR 3 Gore 90° Elbow with (2) Str’s & (2) Flat Flgs-189
• PVC FTR 3 Gore 90° Elbow with Plain Ends-062
• PVC FTR 3 Gore 90° Elbow with Str & Plain Ends-255
• PVC FTR 5 Gore 90° Elbow with (1) Angle Flg-069
• PVC FTR 5 Gore 90° Elbow with (1) Collar-068
• PVC FTR 5 Gore 90° Elbow with (1) Str & (1) Angle Flg-197
• PVC FTR 5 Gore 90° Elbow with (1) Str & (1) Collar-263
• PVC FTR 5 Gore 90° Elbow with (1) Str & (2) Collars-215
• PVC FTR 5 Gore 90° Elbow with (2) Angle Flgs-070
• PVC FTR 5 Gore 90° Elbow with (2) Collars-008
• PVC FTR 5 Gore 90° Elbow with Plain Ends-067
• PVC FTR 5 Gore 90° Elbow with Str & Plain Ends-031
PVC Flex Connectors
• PVC Offset with (1) Angle Flg-223
• PVC Flex with SS Drawbands-162
PVC Connectors
• 1 Viron Loose Angle Rings 3-48 inch dia
• PVC Offset with (1) Collar-168
• PVC Offset with (1) Str-238
• PVC Offset with (2) Angle Flgs-220
• PVC Offset with (2) Collars-257
• PVC Offset with (2) Flat Flgs-020
• PVC Offset with Plain Ends-233
PVC Tapers
• PVC Taper with (1) Collar & (1) Str-089
• PVC Taper with (1) Collar-085
• PVC Taper with (2) Angle Flgs-087
• PVC Taper with (2) Flat Flgs-241
• PVC Taper with (2) Str & (1) Angle Flg-207
• PVC Taper with (2) Str & (2) Collars-093
• PVC Taper with NO Str & Plain Ends-318
• PVC Taper with Plain Ends-084
PVC Straights
• PVC Straight with (1) Boot & (1) Collar-083
• PVC Straight with (1) Boot & Plain Ends-123
• PVC Straight with (1) Boot & Taper-219
• PVC Straight with (1) Boot, End Cap, Plain Ends-022
• PVC Straight with (1) Boot, Taper & (1) Collar-148
• PVC Straight with (1) Collar & (1) Angle Flg-149
• PVC Straight with (1) Collar & (1) Stiffener-180
• PVC Straight with (1) Collar-006
• PVC Straight with (1) Flat Flg-002
• PVC Straight with (2) 90° Taps, Plain Ends-229
• PVC Straight with (2) Angle Flgs-111
• PVC Straight with (2) Boot & Plain Ends-124
• PVC Straight with (2) Boots & (1) Collar-125
• PVC Straight with (2) Boots, Taper & Collar-406
• PVC Straight with (2) Collars-043
• PVC Straight with (2) Flat Flgs-109
• PVC Straight with 45° Tap & (3) Collars-179
• PVC Straight with 45° Tap & Plain Ends-023
• PVC Straight with 45° Tap, Taper & (3) Collars-039
• PVC Straight-Plain Ends 012
• PVC Straight with (1) 90° Tap & Plain Ends-235
• PVC Straight with (1) Angle Flg-110
PVC Wyes
• PVC Wye with (2) Tapers & (1) Collar-276
• PVC Wye with (3) Collars-249
• PVC Wye with Plain Ends-116
PVC Transitions
• PVC Offset Square to Round with (2) Str’s-170
• PVC Square to Round FOB with (1) Collar & (1) Str-163
• PVC Square to Round with (1) Collar & (1) Angle Flg-101
• PVC Square to Round with (2) Str’s-104
• PVC Square to Round with NO Str & (2) Collars-103
PVC Volume Dampers
• PVC Volume Damper with (1) Collar-209
• PVC Volume Damper with (2) Angle Flgs-194
• PVC Volume Damper with (2) Collars-193
• PVC Volume Damper with Plain Ends-041